SEALED AIR GLOBAL | HOME

Home Authorized Dealers Quality Design Typical Installations Specifications How It Works
Related Information

Contact Us:

Phone: 1-800-451-6620
 (US only)

E-mail: Send us email

A Collector to Meet Every Need

FP Series

Provides maximum efficiency at the lowest cost possible while maintaining the highest quality standards.

FS Series

The only framed co-polymer collectors on the market. The frame makes them self supporting and allows for mounting on stringers elevated from the roof surface. This feature facilitates ventilation between the collectors and roof. The frame also makes these collectors an excellent choice for tile roofs and ground mount applications.

The use of stringers allows for a minimum number of roof penetrations necessary for installation. A patented internal coupling system allows for mounting the collectors flush with each other thereby making for a more aesthetically pleasing installation.

FW Series

Features a windscreen that creates a greenhouse effect across the surface of the FS collector reducing heat loss caused by the wind.

Specifications

Frameless Solar Collectors (FP-Series)

Dimensions 4' x 8' 4' x 10' 4' x 12'
Panel weight - full (lbs) 40 lbs. 47 lbs. 54 lbs.
Capacity (gallons) 2.5 3 3.5
Recommended flow rate (gpm) 3-5 3-5 3-5
Static test pressure (psi) 100 100 100
Operating pressure (psi) 25-30 25-30 25-30

Framed Solar Collectors (FS Series)

Dimensions 4' x 8' 4' x 10' 4' x 12'
Panel weight - full (lbs) 65 lbs. 74 lbs. 83 lbs.
Capacity (gallons) 2.5 3 3.5
Recommended flow rate (gpm) 3-5 3-5 3-5
Static test pressure (psi) 100 100 100
Operating pressure (psi) 25-30 25-30 25-30

FP & FS HCP® Hollow Core Profile (ethylene-propylene-copolymer)

Tensile strength 4500 psi ASTM D638
Compressive strength 7500 psi ASTM D695
Flexural yield strength 7000 psi ASTM D790
Resistance to heat (continuous) 290 degrees F  
Flammability 1.75 in./min. ASTM D635
 
 

Product specifications, brands and availability may vary depending on your geographic location.